UART is accessible on the Pi-2 bus (same pins as on a Raspberry Pi), using a baud rate of 1500000.
The MAC address for the system is configurable in /boot/boot.txt. Use spaces instead of colons between each octet. After making changes, run the mkscr script from within /boot.
Copyright ©2009-2022 Arch Linux ARM
The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a world-wide basis.
The Arch Linux™ name and logo are used under permission of the Arch Linux Project Lead.